Panel Batten
Engineered Stock Catalog
Featured Warehouse & Hazardous Location Lighting
Factory-direct industrial luminaires manufactured under strict ISO 9001 QA protocols with in-house IES darkroom photometric validation and 100% aging compliance.
Ex-Rated Zone 1/2
20-50W Round Mini Explosion Proof Ceiling Light
Heavy Flood
30-50W Rectangular Explosion Proof LED Flood Light
High Efficiency
10-24W AC85-265V 120lm/W Explosion Light
Mining High Bay
High Lumen 120lm/W Round Mining Explosion Ceiling Light
Emergency Battery
100W+30W Emergency Backup Explosion Proof LED Lamp
Heavy Flood
75-300W Compact Explosion Proof Industrial Floodlight
Fluorescent Retrofit
Long Strip LED Explosion Proof Fluorescent Light 20W-60W
Industry Intelligence & Procurement Architecture
Global Warehouse Lighting Evolution: Efficiency, IoT & Resiliency
Modern multi-tier logistics hubs, automated fulfillment centers, and chemical storage facilities demand luminaire architectures that go far beyond standard lumen generation.
Efficacy Breakthroughs (160–190 lm/W)
Rising operational expenditures across European and North American 3PL centers have shifted procurement thresholds toward ultra-high-efficacy solid-state engines. Deploying Class-A LED drivers and thermal mitigation matrices slashes total cost of ownership (TCO) across 24/7 operating cycles.
Autonomous Microwave & Mesh Dimming
High-rack warehousing corridors experience prolonged periods of zero foot-traffic. Intelligent microwave Doppler sensors with stepped bi-level dimming (10% stand-by to 100% full-flux) coupled with Zigbee or Bluetooth Mesh protocols optimize load profiles, yielding additional 45-60% energy savings.
Harsh Environment Ingress Immunity
From sub-zero cold chain food distribution centers (-30°C) requiring anti-condensation valves to fertilizer logistics hubs prone to ammonia fumes, high-grade PC housings and silicone gas-tight gaskets guarantee IP65/IP66 and IK08/IK10 durability without optical degradation.
Sector-Specific Warehouse Lighting Engineering Solutions
| Logistics Environment | Core Operational Challenge | Target Lux & Optical Distribution | Recommended Scoden Fixture Series | Compliance Standard |
|---|---|---|---|---|
| High-Bay Automated Racking (12m–18m) | Vertical illuminance drop-off, narrow aisle glare | 200–300 Lux | Narrow 30°×90° Asymmetric | SCD-U1500 UFO & Modular Linear Batten | EN 12464-1, DLC Premium |
| Chemical / Paint Storage Depots | Volatile VOC vapors, explosive air-dust mixtures | 150–250 Lux | 120° Tempered Glass Flood | SCD-EX Flanged Boom & Triple-Cavity Ex | ATEX Zone 1/21, IECEx IIB/IIC T6 |
| Refrigerated Cold Chain Warehouses | Moisture ingress from freeze-thaw cycles (-30°C) | 150–200 Lux | Wide 120° PC Full-Plastic | PC Full-Plastic IP65 IK08 Tri-Proof | HACCP, IP66 Water Jet Test |
| E-Commerce Picking & Packing Bays | Visual fatigue, continuous barcode scanning accuracy | 400–500 Lux | Diffused Anti-Glare (UGR < 19) | LED Stent Lamp & Smart Dimming Batten | ISO 8995-1, CE LVD/EMC |
Direct OEM / ODM / SKD Manufacturing
Engineering Integrity From China's Electrical Capital
Headquartered in Beibaixiang Town, Yueqing, Zhejiang, Scoden Lighting operates precision CNC tooling, high-precision surface-mount packaging, and dedicated optical laboratories to serve overseas engineering contractors and wholesale brands.
PHASE 01
In-House Photometric Lab
Complete with an in-house IES darkroom and goniophotometer system. We deliver certified .IES and .LDT photometric files tailored for Dialux lighting layout simulations on high-stack storage projects.
- Dialux 3D layout calculations
- Real luminous flux testing
- Strict chromaticity binning
PHASE 02
100% Aging & Hi-Pot Testing
Zero-defect delivery is secured through continuous multi-cavity 48-hour burn-in procedures and 3750V AC withstand-voltage testing to avoid breakdown in industrial transient voltage fluctuations.
- High-voltage surge protection (4kV–10kV)
- Multi-cycle thermal shock stress
- Automated glue dispensing validation
PHASE 03
Private Mold & SKD Delivery
We provide complete Semi-Knocked-Down (SKD) kits and custom tooling configurations, allowing regional manufacturers in Southeast Asia, the Middle East, and South America to lower import duties while retaining brand identity.
- Housing + Lens pre-assembled kits
- Driver brand selection (Meanwell/Philips/Sosen)
- Customized silk-screen & retail color box
PHASE 04
Localized Compliance Support
Comprehensive technical documentation portfolios supplied for each batch, including ISO 9001 quality certificates, IP65/IP66 ingress test approvals, and full material safety traceability declarations.
- Third-party CE LVD/EMC reports
- Explosion protection zone certifications
- Full customs export manifests
12+
Years Engineering Focus
2,000m²
Modern Production Plant
30+
Certified Technicians
1
Darkroom Goniophotometer
3
Automated Aging Lines
100%
Hi-Pot Tested Batches
Technical Engineering Guide
Hazardous Area Specification: Zones, Gas Groups & Temperature Classes
Procuring warehouse lamps for industrial chemical plants, grain silos, and refinery depots requires meticulous compliance with IEC 60079 parameters. Prevent costly project redesigns with our selection roadmap.
01. Atmospheric Zone Classification
Define the frequency and duration of combustible vapor or combustible particulate matter in your storage or processing envelope:
Zone 0 / 20: Continuous explosive atmosphere (>1000 hrs/yr)
Zone 1 / 21: Likely under standard operations (10–1000 hrs/yr)
Zone 2 / 22: Unlikely; short abnormal duration (<10 hrs/yr)
02. Gas & Dust Group Assignment
Ensure mechanical enclosure tolerances withstand maximum internal explosion pressure and spark propagation limits:
Group IIA: Propane, butane, industrial solvents
Group IIB: Ethylene, town gas, solvent aerosols
Group IIC: Hydrogen, acetylene (highest standard)
Group III: Combustible flyings (IIIA), non-conductive dust (IIIB), conductive dust (IIIC)
03. Ingress & Impact Rating (IP/IK)
Industrial operations present severe physical challenges beyond thermal risk, including washdown jets and forklift mast impacts:
IP65: Complete dust-tight sealing + low-pressure water jet resistance
IP66: Heavy seas / high-pressure washdown protection
IK08 / IK10: Structural resilience against 5 to 20 Joules direct mechanical impact
Surface Temperature Class Ratings (T-Class Matrix)
The maximum exterior surface temperature of the fixture must never exceed the auto-ignition flash point of surrounding hazardous airborne concentrations.
| Parameter | T1 | T2 | T3 | T4 | T5 | T6 |
|---|---|---|---|---|---|---|
| Max Surface Temp | 450 °C | 300 °C | 200 °C | 135 °C | 100 °C | 85 °C (Safest) |
Industrial Wholesale Inventory
Explore Complete Commercial & Plant Luminaires
Bulk wholesale supply for worldwide distributors, electrical engineering firms, and industrial lighting retrofits. Factory warranties supported by rapid dispatch.
Anti-Glare 360°
360° Anti-Glare Small Explosion Proof Industrial Light
Modular Flood
Multi-Module Explosion Resistant Flood Lamp 300W 400W
Tri-Proof PC
PC Full-Plastic IP65 IK08 Waterproof LED Tri-Proof Batten
Smart Microwave
Intelligent Microwave Dimming Sensor Industrial Batten
High Bay UFO
SCD-U1500 UFO Explosion-Proof LED High Bay Fixture
Batten Bracket
SCD-LT8 Integrated Linear LED Bracket Stent Lamp
Wet Environment
Heavy-Duty IP65 IK08 Impact-Resistant Batten Lamp
Multi-Volt AC/DC
Multi-Voltage Industrial Cleanroom & Storage Batten
Future Engineering Matrix
Technology Roadmap: Intelligent Warehouses (2025–2030)
Scoden Lighting continues to invest in emerging industrial optical architectures, integrating advanced control systems and materials into warehouse fixtures.
AI-Integrated Edge Photometrics
Moving beyond basic PIR motion detection, our next-generation fixtures embed machine learning edge processors that optimize lux output dynamically in response to automated guided vehicle (AGV) traffic velocity and high-rack forklift routing schedules.
Advanced Thermal Graphene Dissipation
To accommodate high ambient temperature installations (up to +65°C found in Middle Eastern distribution centers and metallurgy staging zones), we incorporate graphene-composite heat spreaders that deliver a 25% weight reduction while accelerating thermal conduction away from the LED diode matrix.
Circular Economy & Modularity
In accordance with stringent European Ecodesign and RoHS requirements, our future product platforms enable tool-less field replacement of optical engines and power driver assemblies, dramatically extending the mechanical enclosure lifecycle and minimizing industrial electronic waste.
Supply Chain Trust
Global Component & EPC Integration Partners
We build collaborative partnerships with world-class component suppliers, regional distributors, and engineering contractors to deliver competitive and reliable luminaires.
Technical FAQ
Frequently Asked Procurement & Engineering Questions
Everything international buyers, electrical wholesalers, and EPC engineering contractors ask when sourcing warehouse and hazardous location luminaires.
What is the functional difference between an LED tri-proof light and an explosion-proof light?
A tri-proof light is designed to resist water, dust, and corrosion (rated IP65 to IP66, IK08), making it ideal for car parks, cold storage, agricultural facilities, food plants, and general warehousing. In contrast, an LED explosion-proof luminaire is built with a heavy-duty flameproof or encapsulated housing (ATEX / IECEx certified) specifically engineered to prevent internal electrical arcs or hot surfaces from igniting surrounding flammable gases (Zones 0, 1, 2) or combustible dust atmospheres (Zones 20, 21, 22).
Does Scoden Lighting support OEM, ODM, and SKD delivery models?
Yes. We provide complete manufacturing services ranging from custom tooling and private-label silk printing to full ODM product design. For importers seeking to optimize tariff structures or perform local assembly in their domestic markets, we export Semi-Knocked-Down (SKD) kits with pre-tested electronic drivers, optical diffusers, and mechanical housing components.
What quality verification and documentation do you provide for large-scale tenders?
We provide comprehensive project documentation packages, including certified .IES photometric data measured in our darkroom goniophotometer, Dialux simulation assistance, ISO 9001 quality certificates, 48-hour aging logs, high-voltage withstand test sheets, CE LVD/EMC test certificates, and complete material specifications.
Can your warehouse fixtures integrate emergency battery backups and smart sensors?
Yes. Our fixtures support integrated microwave motion sensors (5.8GHz), 0-10V / DALI intelligent dimming protocols, CCT tunable engines, solar-assisted inputs, and self-testing emergency lithium battery packs (delivering 90 to 180 minutes of continuous illumination during central grid outages).
Where is your production facility located, and can our engineering team schedule a factory audit?
Our manufacturing plant is located in Beibaixiang Town, Yueqing City, Wenzhou, Zhejiang Province, China — in the heart of China’s Electrical Capital. We encourage in-person site inspections, third-party audits (such as SGS or TÜV), as well as real-time interactive video audits for our international clients.
Plan Your Warehouse Lighting Project With Factory Direct Engineers
Access certified photometric data, receive wholesale volume pricing tiers, or consult our engineering team for custom hazardous area specifications.