Cleanroom & Office
Product Showcase I
High-Performance Linear Battens & Hazardous Luminaires
Aged under 100% load, hi-pot verified, and measured via darkroom IES photometric reporting. Direct quotes and OEM customized batches available globally.
ATEX / IECEx Grade
20–50W Round Mini Explosion-Proof Ceiling Light
20–50W
Die-Cast Al
Hazardous Zone
Request Wholesale Quote
Heavy Industrial
30–50W Rectangular Explosion-Proof LED Flood Light
IP65
Tempered Glass
Boom-Elbow
Request Wholesale Quote
High Efficiency
Mining Grade
High Lumen 120 lm/W Mining Explosion Ceiling Light
Mining Spec
Vibration Proof
IK10 Rated
Request Wholesale Quote
Fail-Safe Emergency
100W + 30W Emergency Backup Explosion-Proof Lamp
IP66 Triple-Cavity
LiFePO4 Backup
Pole-Mount
Request Wholesale Quote
High Wattage
75–300W Compact Explosion-Proof Floodlight
75–300W Range
Anodized Fin
Heavy Duty
Request Wholesale Quote
Direct Linear Retrofit
Long Strip LED Explosion-Proof Fluorescent Light
20–60W
Linear Batten
T8 Retrofit
Request Wholesale Quote
Strategic Sourcing Analysis
Global Enterprise Procurement Dynamics for Linear Battens
Comprehensive industry breakdown of current challenges, cost structures, and technical specifications governing commercial and industrial continuous lighting arrays.
Supply Chain Resilience & SKD Optimization
Global logistics bottlenecks and varying regional tariff schedules (such as US Section 301 or European carbon border adjustments) drive large importers toward Semi-Knocked Down (SKD) kits. Sourcing complete PC full-plastic extrusions or aluminum sub-assemblies cuts container volume tariffs while preserving factory warranty protection.
- Up to 42% logistics space compression via modular nesting
- Regional final assembly qualifies for domestic preferential tariffs
- Rapid SKU configuration tailored to dynamic market needs
Strict Mechanical Resilience (IK08–IK10 / IP66)
Modern distribution warehouses, subterranean transit networks, and pharmaceutical cleanrooms impose rigorous chemical wash-down and physical impact demands. Linear fixtures must balance seamless anti-glare diffusers with internal structural trusses capable of withstanding industrial vibration and pressurized water jets.
- Polycarbonate co-extrusion with advanced UV stabilization
- Continuous silicone gasket foaming for permanent IP66 integrity
- Corrosion resistance against aggressive alkaline/acidic vapors
Intelligent Autonomous Sensing & Dimming
Driven by ISO 50001 energy compliance directives, smart sensor integration is shifting from external add-ons to native architectural features. Integrated high-frequency 5.8 GHz microwave sensors concealed within the luminaire provide multi-tiered dimming profiles and daylight harvesting without compromising IP ratings.
- Standby dimming (10%–30%) reduces unoccupied energy burn
- DIP-switch tunable lumen packages and CCT switching
- DALI-2 and 0-10V control bus protocol compliance
Yueqing Industrial Cluster
Engineering Credentials & Manufacturing Ecosystem
Operating from China's "Electrical Capital," Zhejiang Skodan Lighting Co., Ltd. integrates 12+ years of industrial luminaire expertise with direct access to upstream raw material supply chains.
High-Efficiency Production
Automated cutting, punching presses, high-precision glue dispensing, and laser engraving lines ensure agile production with reduced cycle times.
- Rapid 72-hour sample prototyping
- Agile OEM laser labeling & customized packaging
- High-capacity assembly lines
OEM / SKD / ODM Engineering
Full private tooling management and bespoke CAD/thermal simulations. Dedicated support for regional assembly plants seeking SKD solutions.
- In-house optical lens and extrusion mold tooling
- Comprehensive SKD modular kit provisioning
- Bi-monthly aesthetic & functional model upgrades
Stringent Quality Verification
Certified ISO 9001 facility. Every industrial luminaire runs through complete withstand-voltage, surge, thermal, and photometric checks.
- Darkroom goniophotometer IES test generation
- 100% 4-hour burn-in and hi-pot voltage stress screening
- Sourced Tier-1 LED chips and constant-current drivers
Dedicated International Export Team
Direct communication with veteran optical and electrical engineers to accelerate engineering reviews, DIALux layouts, and customs clearance.
- Comprehensive documentation (CE, RoHS, CB, ATEX dossiers)
- Real-time DIALux project lighting simulations
- On-site and live digital video factory audits
12+
Years Manufacturing Excellence
2,000 m²
Modern Production Plant Area
100%
Hi-Pot & Aging Tested Units
ISO 9001
Certified Quality Management
Engineering Benchmark
OEM Linear Batten Light Specification & Pricing Matrix
Reference unit pricing benchmarks based on typical MOQs (500–1,000 units), standard factory configurations, and custom option tiers.
| Series Configuration | Dimensions & Wattage | Luminous Efficacy | Protection Rating | Standard Features | Direct OEM Price Benchmark |
|---|---|---|---|---|---|
| Standard Eco Tri-Proof Batten | 600mm / 1200mm (18W - 36W) | 120 - 130 lm/W | IP65 / IK08 | Polycarbonate Body, Quick-clip mount | $6.80 – $12.50 / unit |
| Pro Commercial Linear Batten | 1200mm / 1500mm (36W - 60W) | 140 - 160 lm/W | IP65 / IK08 | Power & CCT Tunable DIP switches | $13.20 – $19.80 / unit |
| Intelligent Sensor Linear Batten | 1200mm / 1500mm (40W - 65W) | 140 lm/W | IP65 / IK08 | Internal Microwave 5.8GHz Sensor, Corridor Dim | $16.50 – $24.00 / unit |
| Emergency Tri-Proof Luminaire | 1200mm / 1500mm (36W - 60W) | 130 - 150 lm/W | IP66 / IK08 | 90-180 min LiFePO4 battery pack, Self-test | $22.00 – $32.50 / unit |
| Hazardous Heavy Linear Fitting | 600mm / 1200mm (20W - 60W) | 120 - 140 lm/W | IP66 / IK10 | Die-cast Al, Tempered Glass, Zone 1/21 Ex-proof | $45.00 – $85.00 / unit |
*Note: Unit prices are FOB Ningbo/Shanghai benchmarks subject to raw material costs (aluminum, polycarbonate resin, LED driver chipsets) and custom packaging specifications.
Technical Roadmap
Hazardous Area Lighting Engineering: Zone, Gas Group & T-Class
Ensure seamless cross-border regulatory approvals by matching hazardous parameters against the IEC 60079 framework before final quotation sign-off.
01. Hazardous Zone Delineation
Proper zone assignment prevents dangerous over- or under-engineering across petrochemical, spray booth, and grain storage plants.
- Zone 0 / 20: Continuous explosive atmosphere present
- Zone 1 / 21: Likely to occur during standard plant operation
- Zone 2 / 22: Unlikely; if present, persists for short intervals
02. Gas & Dust Group Ratings
Luminaires engineered for Group IIC provide complete cross-compatibility across all lower gas ignition categories.
- Group IIA: Propane, butane, industrial methane
- Group IIB: Ethylene, town gas mixtures
- Group IIC: Hydrogen, acetylene (Maximum hazard class)
03. Surface Temperature Classes (T-Class)
Fixture exterior temperature must never exceed the auto-ignition flash threshold of present industrial vapors.
- T1 to T3: 450°C down to 200°C maximum threshold
- T4: 135°C (Standard industrial threshold)
- T5 to T6: 100°C down to 85°C (Stringent safe containment)
Product Showcase II
Specialized Industrial Floodlights & Modular Luminaires
Explore heavy-duty luminaires designed for oil depots, hazardous manufacturing floors, logistics hubs, and marine environments.
Anti-Glare 360°
360° Anti-Glare Small Explosion-Proof Light
360° Optic
Die-Cast Base
Anti-Glare
Request Wholesale Quote
High Mast High Watt
Multi-Module Explosion-Resistant Flood 300W/400W
300W–400W
Modular Matrix
High Mast
Request Wholesale Quote
High Bay Ex
SCD-U1500 UFO Explosion-Proof High Bay Light
UFO Design
Zone 1 / 21
Heavy Foundry
Request Wholesale Quote
Integrated Bracket
Full Plastic IP65
Full-Plastic IP65 IK08 Waterproof Batten Light
Anti-Corrosion
Seamless PC
Car Parks
Request Wholesale Quote
Severe Wet Service
Industrial Heavy Waterproof Continuous Batten
IP66 Rated
High Lumens
Food Plants
Request Wholesale Quote
High Impact
Impact-Resistant Robust Linear Tri-Proof Batten
IK08 Impact
UV Block PC
Cold Storage
Request Wholesale Quote
Smart Dimming
Intelligent Radar Dimming Linear Batten Light
5.8GHz Sensor
Auto Dimming
Energy Saver
Request Wholesale Quote
International Verification
Audited Testing & Qualified Supply Chain Partners
Certifications verifying compliance for global engineering tenders, alongside strategic suppliers supporting our component ecosystem.
ISO 9001:2015 System Certification
IECEx / ATEX Hazardous Directive
CE LVD / EMC Compliance Report
IP66 / IK08 Environmental Proofing
+ Strategic Global EPCs
Technical Inquiry Directory
Frequently Asked Questions: OEM Procurement & Engineering
Key information on factory minimum order quantities, SKD kit packing, thermal dissipation tolerances, and hazardous compliance documents.
What is the technical and structural distinction between an LED tri-proof light and an LED explosion-proof linear light?
A tri-proof light is sealed with elastomeric gaskets to protect against water, moisture, dust, and corrosive vapors (typically rated IP65–IP66 and IK08). It is engineered for parking garages, commercial cold rooms, food handling facilities, and standard industrial logistics hubs. An explosion-proof light is engineered with a flameproof (Ex d) or increased safety (Ex e) enclosure—typically made from copper-free die-cast aluminum with heavy tempered glass. It is tested to contain internal explosions without igniting volatile external gases or combustible dust in hazardous zones (Zones 1, 2, 21, and 22).
How does Scoden support OEM, ODM, and SKD (Semi-Knocked Down) procurement programs?
We provide full private-mould development, bespoke optical tooling, customized driver wattages, and branded silk-screening or laser marking. For overseas assemblers looking to reduce customs tariffs, we ship calibrated SKD kits—including pre-extruded housings, populated LED MCPCBs, matching drivers, and gasket systems—alongside detailed assembly jigs and standard operating procedures (SOPs).
What technical documentation and photometric test deliverables accompany quotation requests?
Every production batch is supported by comprehensive documentation, including detailed spec sheets, IES/LDT photometric distribution files recorded in our in-house darkroom, high-potential (hi-pot) dielectric test records, and ISO 9001 compliance logs. Certificate copies (CE, RoHS, CB, and explosion-proof compliance certificates) are provided with engineering verification packs.
Can linear battens be configured with emergency battery backups and intelligent microwave sensors?
Yes. Our linear batten luminaires can be equipped with high-temperature LiFePO4 battery modules offering 90 to 180 minutes of autonomous illumination during power failure. We also integrate concealed 5.8GHz microwave motion sensors with DIP-switch adjustments for detection range, hold time, daylight threshold, and corridor standby dimming (10% to 30%).
Where is the manufacturing plant located, and can third-party auditors visit?
Our manufacturing facility is located in Beibaixiang Town, Yueqing City, Wenzhou, Zhejiang Province, China (within Yueqing Leading CNC System Co., Ltd.). This central location in China's Electrical Capital provides close proximity to Ningbo and Shanghai export ports. We welcome scheduled client visits and live video audits conducted by third-party inspection firms (such as SGS or TÜV).
Direct Factory Procurement
Request Your Project-Specific Quotation & IES Files
Connect directly with our engineering and export desk in Yueqing. We provide complete tender documentation, customized photometric models, and tiered volume pricing within 24 business hours.