CE Certification Parking Garage tri-proof lamp Manufacturers & Suppliers

Genuine CE certification demands full compliance under two mandatory European Directives: the Low Voltage Directive (LVD) 2014/35/EU, governed by safety testing under EN 60598-1 and EN 60598-2-1 (covering insulation resistance, creepage distances, thermal endurance, and 3.75kV dielectric testing); and the Electromagnetic Compatibility (EMC) Directive 2014/30/EU, tested under EN 55015 for radio disturbance emissions, EN 61547 for immunity, and EN 61000-3-2 Class C for harmonic current control. Additionally, RoHS 2.0 hazardous substance limitations must be fully validated with genuine testing reports.

Microwave radar operates at 5.8 GHz and can penetrate lightweight partition walls and hollow ceilings, frequently triggering adjacent fixtures unnecessarily. Scoden addresses this through dip-switch selectable antenna sensitivity adjustments (100%, 75%, 50%, 25%), customized detection angles, and directional metal shielding clips behind the module. We also implement a programmed hold-time (e.g., 30s to 3min) and a bi-level standby dimming threshold (10% to 30% background light), guaranteeing stability without ghost triggers.

Yes. Our parking tri-proof fixtures offer through-wiring configurations with 3-phase 5-wire (L1, L2, L3, N, PE) or emergency-controlled 6-wire internal copper busbars (1.5mm² or 2.5mm² cross-section). This permits daisy-chaining up to 40 fixtures on a single electrical feed without excessive voltage drop, significantly lowering cable and conduit installation costs for electrical contractors.

A standard tri-proof lamp is sealed specifically against water ingress, dust accumulation, and chemical corrosion (IP65 to IP66 ratings). An explosion-proof light is built with a heavy-duty explosion-containment flameproof housing (Ex d) or increased safety design (Ex e) certified under ATEX / IECEx. It is engineered to withstand an internal gas ignition without letting flames escape into flammable hazardous atmospheres (such as Zone 1 or Zone 2 paint depots, solvent stores, and oil pump rooms). In parking structures, tri-proof lights are installed across driving aisles and parking stalls, whereas explosion-proof fixtures are deployed in battery charging rooms and paint maintenance bays.

Scoden provides a standard 3 to 5-year replacement warranty on CE-certified tri-proof lights. We employ high-grade Sanan or Epistar SMD2835 LEDs with high color consistency (SDCM < 3), paired with isolated constant-current drivers featuring active power factor correction (PF > 0.95) and dual-stage surge suppression (L-N 2kV, L/N-PE 4kV to 6kV).